ALIGNMENT SPECIFICATIONS
Before performing wheel alignment, verify the following specifications:
Fuel Tank — Full
Trunk — Contains only normally present items
Wheel Nut Torque — 60 ft. lbs.
Wheel Bearing End Play — .001” - .008”
Caster
Positive 2º + 1/4º - 1/2º (Within 1/2º of opposite side.)
Camber
Positive 1º ± 1/2º (Within 1/2º of opposite side.)
Camber Bolt Lock Nut Torque — 80 ft. lbs.
Steering Axis Inclination
6 1/2º ± 1/2º
Toe-in
3/16” to 5/16” (This adjustment must be made after Caster & Camber adjustments)
ADDITIONAL TORQUE SPECIFICATIONS
Speedometer Cable to Steering Knuckle — 40 Inch lbs.
Upper & Lower Ball Stud Nuts — 35 ft. lbs.
Steering Arm Bolt — 45 ft. lbs.
Brake Anchor Bolt — 80 ft. lbs.
Stabilizer Bar Clamp Bolt — 120 Inch lbs.
Replacement Ball Joint to Control Arm — 25 ft. lbs.
Cross Shaft Bolt — 40 ft. lbs.
Acceptable Ball Joint Rotational Torque — 3 ft. lbs. ± 1
RELATED VIDEO:
